Specification: Color: RGB (Red Green Blue) Flash SMD 150 LED View angle: 120 degree Supply voltage: DC 12V Operating temperature: -20 to 60 degree LED quantity: 30LED/m, 150 LEDs Working Current: 2A Lumens: 900LM Lifetime: 50,000+ hours Remote: 24Key Remote Controller Working Temperature: -20C-60C Output: three CMOS drain-open output Connection mode: Common Anode(+) Input/Output: 12V Max load current: 2A each color 24 Key Remote Controller Type: 24Key Connection mode: Common Anode (+) Input/Output: 12V Max load current: 2A each color Output: Three CMOS drain-open output Color: 8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change /R / G / B increase and decrease control Note: 1. When use the remote control, please towards the remote in front of the sensor on the control box. 2. Please connect the IR remote with this led strips as the arrow indication and should be on the same side, or the lights will not turn on. 3. Please do not put this flexible led tape close to high temperature position. 4. Before using, please make sure this rgb led strip lights are connecting to the power supply well
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
